WBT-0705 Nextgen Pole Terminals
- Available in Cu or Ag
- Available loosely packed in sets of 2 or retail boxed in a set of 4
External connection
The smart design of the signal conductor enables a secure termination of cable ends, banana plugs and crimped cable ends.
Internal connection
Soldering lugs which can be bent by hand if necessary. WBT recommends application of the silver solder WBT-0800/0805 which is gentle to the precious surfaces.
Mounting
Mounting insulators are included to ensure not only insulated, but also torsion-resistant mounting and polarity identification of the terminals. In case of hi-fi devices being strongly exposed to impact sound such as loudspeakers it is recommended to use an additional nut locking aid which is the fluid screw retention LOCTITE 4804. It is matched with WBT high tech plastics, and it is removable. Besides, WBT recommends using the impact sound interrupter WBT-0718.
Specifications:
| Conductor cross section (max.): | outside: 4 mm² (11 AWG)
inside: 4 mm² (11 AWG) |
| Connection technology: | outside: 4 mm banana plug, spades (6 - 8 mm spade), crimping
inside: soldering or 6.3 mm flat push-on cable shoe |
| Wall thickness: | from 0.9 to 10.0 mm (with puzzle plate from 0.9 to 8.0 mm) |
| Identification: | red, white or black
|
